background image

122

123

APP

FCC compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions:(1) this device may not cause harmful interference, and (2) 

this device must accept any interference received, including interference that may 

cause undesired operation.

Warning:  Changes or modifications to this unit not expressly approved by the 

party responsible for compliance could void the user’s authority to operate 

the equipment.  

Note: This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates uses and can radiate 

radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or tele-

vision reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or more of 

the following measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.

• 

Consult the dealer or an experienced radio/TV technician for help.

Statement for Industry Canada

This device contains licence-exempt transmitter(s)/receiver(s) that comply with 

Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). 

Operation is subject to the following two conditions: 
(1) This device may not cause interference. 
(2) This device must accept any interference, including interference that may cause 

undesired operation of the device.
L' émetteur/récepteur exempt de licence contenu dans le présent appareil est 

conforme aux CNR d' Innovation, Sciences et Développement économique Canada 

applicables aux appareils radio exempts de licence. L' exploitation est autorisée 

aux deux conditions suivantes : 
(1) L' appareil ne doit pas produire de brouillage; 
(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouil-

lage est susceptible d' en compromettre le fonctionnement.

EAR PHONES

NECK LOOP

TRAVEL CASE

EXT. MICROPHONE, 5 m/16'

CABLE KIT,  5 m/16'

HEADPHONES

MICROSET™

Accessories

These original accessories are especially developed to maximize the performance 

of your Mino. Contact your nearest dealer or visit 

bellman.com

Support centers

Europe

 

Bellman & Symfon Group AB 

Södra Långebergsgatan 30

436 32 Askim, Sweden 

Call +46 31 68 28 20 

E-mail [email protected]

North America

 

Bellman & Symfon North America Inc. 

5509 Business Dr, Unit B 

Wilmington, NC 28405, Unites States 

Phone: +1 (910) 239 5796  

Toll-free: + (833) 235 5626 

E-mail: [email protected] 

Germany

 

Bellman & Symfon Deutschland GmbH 

Uelzener Str. 14 

21335 Lüneburg 

Call +49 800 7433338 

E-mail [email protected]

Asia Pacific 

Bellman & Symfon Asia Pacific 

1401-06 Main Tower, GD Int’l 

Building 339 Huanshi Dong Rd 

Guangzhou, China, 510095 

Call +86 20 8318 2950 

E-mail  [email protected]

Summary of Contents for Bellman Audio Mino BE2030














Reviews: