background image

108087425

CR1632

Enclosed you will find the replacement battery for your Bell Smart Home Personal Panic Device. Please refer to 
the list below to identify the personal panic device belonging to you that requires a battery replacement, then 
follow the step-by-step instructions on how to replace it.

Battery Disposal

We encourage you to dispose of your old battery in an environmentally friendly way. For more information 
about the designated battery types and recycling depot locations, please visit 

www.call2recycle.ca

.

Instructions

Please start by disarming your system.

1.  Remove the two screws on the back of the Personal Panic Device, observing 

how the wristband components are attached. 

2.  Carefully separate the cover and base.
3.  Remove the electronic subassembly (blue circuit board) from the base. 
4.  Remove the battery from the electronic subassembly.
5.  Install the new battery.
6.  Place the electronic subassembly back into the base.
7.  Put the cover back and replace the screws.
8.  Contact Technical Support to confirm the battery replacement was successful 

and the device is in proper working order. Contact numbers are located at the 
end of this document.

1.  Remove the top cover by inserting a small flat-head screwdriver into the slot 

(located on the bottom right corner) and twist gently.

2.  Remove the circuit board from the plastic case, and then remove the battery 

from the circuit board.

3.  Insert the replacement battery with the (+) sign facing out.
4.  Replace the circuit board in the plastic case, and then replace the top cover.
5.  Contact Technical Support to confirm the battery replacement was successful 

and the device is in proper working order. Contact numbers are located at the 
end of this document.

Interlogix Personal Panic Device

Battery Type: 1 x CR1632

2GIG Personal Panic Device

Battery Type: 1 x CR1632

Battery replacement instructions for your Bell Smart Home equipment.

For any additional questions about your Bell Smart Home equipment, visit 

bell.ca/smart-home

Or call our Technical Support team using the following numbers: 
Ontario and Québec: 

1 877 267-2004

. Manitoba: 

1 866 949-0078

New Brunswick, Nova Scotia, Newfoundland and Labrador and PEI: 

1 844 474-2023

.

Reviews: