Bell System Master 200Plus, Operator'S Manual

Page: 7 / 35

18 September 2003 PD001 Iss 2
- 4 -
M200+ Accessories
Ceiling Pull Switch (Illuminated) : One or more of these remote switches may be
connected to the Room Unit to enable an alarm call to be made from various positions
within a flat. The optional illumination is provided to reassure the resident that the call
has been registered by the system.
Jack-Socket : This enables a pear-drop switch or similar device to be plugged into the
side of the M200+ room unit. This may be removed when not required either by
replacing it with the dummy plug (supplied) or by disabling the feature by programming.
Smoke Detector : A suitable smoke detector may connected to the ‘Smoke Detector’
input of the room unit. A high priority alarm call is generated if the smoke detector is
triggered.
Remote Alarm 2: One or more of these remote switches may be connected to the
Room Unit to enable an alarm call to be made from various positions within a flat. The
optional illumination is provided to reassure the resident that the call has been
registered by the system. This type of alarm is only avaliable if the smoke detector is
not needed.
Presence Lamp : This lamp is normally fitted outside the room, above the door and
signals the presence of a member of staff in that room.