BELL LABS INNOVATIONS Lucent Technologies 3B21D, Routine Maintenance Tasks

Page: 39 / 216

Tasks Maintenance Routine
Drive (DAT) Tape Audio Digital Clean
the on label the using or logbook a keeping as such procedure, local a Develop 6. HP
used. been has cartridge cleaning each times of number the track to C5709A, P/N
use. of history a provide to recorded be should usage of date The
NOTE:
The HP of number the tracking for used be can that label a has C5709A P/N
label a have not may cartridge equivalent An used. been has cartridge a times
usage. tracking for used be can that
of date the record and door loading drive the from cartridge cleaning the Remove 7.
cartridge. the discard uses, 25 After procedure. local per usage
drive. DAT the into cartridge DAT a load appropriate, If 8.
PROCEDURE: DAT LOAD
drive The door. loading drive the into cartridge DAT the insert Gently 8.1.
loading. the completes and cartridge the ‘‘grabs’’ automatically
!
WARNING:
is force little Very drive. the into cartridge the ‘‘jam’’ not Do
drive the damage can force insertion much too required;
mechanism.
follows: as completes automatically sequence loading cartridge The
BOM. the to it rewinds and tape the threads drive The
0. Partition for BOP the to advances tape The
format tape the determine to checked is area reference The
on). so and audio, (DDS,
for BOP the at it leaves drive the blank, is tape cartridge the If
command. next the for waits and 0 Partition
a high, is rate error the If caution panel front the on signaled is
alternately and green indicator cartridge the lighting by indicators
amber. and green indicator drive the flashing
read is log tape the and accessed, is tape the on area system The
drive. the into
on-line. goes and BOP the to rewinds drive The
9. PROCEDURE. THIS COMPLETED HAVE YOU STOP!
2-4 254-303-101 1999 September Revised: 3, Issue