BELL LABS INNOVATIONS Lucent Technologies 3B21D, Routine Maintenance Tasks

Page: 171 / 216

Tasks Maintenance Routine
Interface Operator Verify
lid. cover ROP the Close 7.9.
ROP the Set 7.10. POWER to switch ON.
Step to Continue 7.11. 8.
attributes. ROP 602 Model Check 8.
PROCEDURE: ATTRIBUTES ROP 602 MODEL CHECK
the hold and press panel, control ROP the At 8.1. SHIFT then and button
the press SEL received). be can data (no ROP the deselect to button
18-2. Figure See
The Response: SEL/MENU displays indicator MENU.
the hold and Press 8.2. QUALITY PRINT the press then and button SHIFT
settings. menu current all print to button
regardless settings menu current all prints ROP The Response:
engaged. options and emulation of
the that Note 18-3. Table with settings current of printout the Compare 8.3.
in shown are settings default italics bold .
the press changed, be to need values If 8.4. GROUP through scan to button
Groups, the of summary a for 18-3 Table See listings. of groups the
Settings. and Items,
the time Each Response: GROUP will line a pressed, is button
group. the within item next the showing print
NOTE:
the hold and press group, one back go To SHIFT then and button
the press GROUP button.
the press selected, been has Group desired the After 8.5. ITEM to button
group. particular a for items the through scan
the time Each Response: ITEM print will line a pressed, is button
item. that for setting next the showing
NOTE:
the hold and press item, one back go To SHIFT then and button
the press ITEM button.
1999 April 3 Issue 254-303-101 18-11