Charging the Belkin QODE Ultimate
Keyboard Case
IMPORTANT:
Before using your
Belkin QODE Keyboard
, make sure to disconnect the
Bluetooth®
devices previously connected to it. Also, if the keyboard layout of your device is different from that of
your Hardware Keyboard, you must change the keyboard language to update the output. Modifying
only the iPad® or mobile phone language, will not change the keyboard output. For more
information on how to change this o
. For more information on
how to change this on your iOS device, click
Charging the
Belkin QODE Ultimate Keyboard Case
is easy with its micro-USB cable. The Belkin
QODE Ultimate Keyboard Case variants are the following:
Belkin F5L151
(for iPad Air®)
Belkin F5L178
(for iPad Air® 2)
Belkin F5L149
(for iPad® 4th and 3rd generations and iPad® 2)
To charge the Belkin QODE Ultimate Keyboard Case, connect one end of the micro-USB cable to
the QODE Ultimate Keyboard Case and connect the other end to a computer or to a USB wall
adapter. Make sure that the cable is in good condition and both ends are properly connected.
The indicator lights of the Belkin QODE Ultimate Keyboard will indicate when it is time to charge.
If it has
low battery charge
– An
orange
indicator light will flash once every second for
1 minute.
If it is
charging
– The
orange
indicator light turns
ON
during charging and turns
OFF
when
charging is complete.
QUICK TIP:
The Belkin QODE Ultimate Keyboard Case requires approximately
2.5 hours
of
charging for first time use. The keyboard will be in standby mode after 10 seconds of inactivity to
prevent the battery's power from draining.
For more information about the Belkin QODE Ultimate Keyboard Case, click on the links below:
onnecting the Belkin Keyboard via
Bluetooth®
Whenever you need to use a different tablet with your Belkin Keyboard, pairing must be
performed to ensure that your keyboard is in control of the correct device.
