10
Belkin Secure Web Camera Adapter User Manual
InsTallaTIon
SECTIONS
3
before Installation
unpack the Product
Before opening the product’s sealed packaging, inspect the packaging’s
seals to assure that the packaging was not opened or tampered with
during shipping. If the packaging’s seals look suspicious, do not use the
product and contact Belkin support.
After opening the packaging, inspect the package contents to verify
all required components are included. See the packaging contents list
on page 1.
After removing the Belkin Secure Web Camera Adapter from its
packaging materials, inspect the tamper-evident label to assure that it
is properly sealed and was not tampered with. Do not use that product
if the label is damaged or missing, and contact Belkin support.
where to Place the belkin secure web Camera adapter
The Belkin Secure Web Camera is designed to be placed on a desktop
within easy reach, typically next to the keyboard or mouse, or near the
base of the display.
Optionally, you can fix the Belkin Secure Web Camera Adapter to a rack
or table using VELCRO
®
pads, if necessary.
The Secure Web Camera Adapter must be located in a secure and well-
protected environment, to prevent potential access by attackers.
Consider the following when deciding where to place the Belkin Secure
Web Camera Adapter:
User can easily reach and press the push-buttons.
Distance: The longest USB cable from the Secure Web Camera Adapter
to the connected computer can be up to 16 feet.
The web camera must connect directly to the Belkin Secure Web
Camera Adapter.
Install web Camera software
Before connecting the Belkin Secure Web Camera Adapter, install the
web camera driver software on the computer to which the web camera
will connect. This may require connecting the web camera directly to
the computer and configuring its software.
It is possible to use other audio\video USB devices through the
Secure Web Camera Adapter.
The adapter will not allow USB storage or HID devices to be used.
