F1DN-MOD-VMOUNT 8820-03129 Rev.A00
© 2020 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers
F1DN-MOD-VMOUNT
Belkin Modular KVM/KM VESA Mount
For models: F1DN102-BA-4, F1DN202MOD-BA-4, F1DN104MOD-BA-4, F1DN204MOD-BA-4, F1DN002KM-4, and
F1DN004KM-4
The Belkin Secure Modular KVM/KM Switch VESA Mounting Bracket is designed for quick deployment and attaches to the KVM/KM via tension to two 90 degree
brackets. There are no screws required to fasten the KVM/KM to the bracket. The unit can be secured to a VESA 100mm x 100mm mounting location using the included
cable ties around each or several host and console cables. In addition, each cable that attaches to the KVM/KM comes with Velcro tie wraps that can be used to secure
the unit to the mount and signify the enclave connected by color. See illustrations for full details.
Quick Installation Guide
Belkin Secure Modular KVM/KM Switch VESA Mounting Bracket Guide
• VESA Mounting Bracket
• Screw - M4x14mm PH Phillips DW SEMS SS Qty 6
• Cable Tie - 3.2x140mm Nylon Black Qty 8
• 1 QIG (Quick Installation Guide)
Included Contents:
• Determine where you will be mounting the bracket and the orientation of the bracket to the back of the user monitor (see below). NOTE- should the monitor to
be used does not have an exposed 100mm x 100mm VESA pattern and nut inserts, the F1DN-MOD-VMOUNT will require a 3rd party adapter and monitor stand.
Contact your system administrator for details on how to achieve the adapter and stand. If the monitor does have an exposed 100mm x 100mm VESA pattern,
continue on with the installation instructions.
• Ensure the bracket will be installed on a flat, clean, and dry surface on the monitor. This bracket is not intended for
exposed outdoor installation
.
• Ensure that maximum distance between the KVM/KM bracket and each computer does not exceed your
cabling lengths
.
• Ensure that the keyboard, mouse, and display cables will reach the mounted KVM/KM.
• Ensure that the KVM/KM included remote control buttons are easily visible and accessible by the intended user.
• Ensure that the included screws are adequate size and type for the designated installation.
I
n some cases with an adapter and stand, 3rd party hardware may be
required.
Pre-Installation Guidelines
