6
Hardware Installation
(continued)
PLEASE FOLLOW THIS INSTALLATION PROCEDURE EXACTLY. NOT DOING SO MAY RESULT IN KEYBOARD
AND/OR MOUSE ERRORS, OR FAULTY OPERATION.
WARNING:
Before attempting to connect anything to the OmniView
™
MATRIX or the computers,
make sure everything is powered off. Plugging and unplugging cables may cause irreversible damage
to your computers and the OmniView
™
MATRIX. Belkin Components will not be held responsible for
damage caused.
1.
Find a convenient place to put your OmniView
™
MATRIX. Its 19" form factor makes it ideal for 19" racks. When
mounting to a rack, attach the included brackets to the sides of the OmniView
™
MATRIX. Take note of the
length of your cables so that your computers, OmniView
™
MATRIX, keyboards, mice, and monitors are
distanced properly.
2.
Connect the monitor to the OmniView
™
MATRIX. Using the attached cable, or the one included with your
monitor, connect it to the HDDB15 female port on the back of the OmniView
™
MATRIX this part is labeled
with the monitor symbol and is at the CONSOLE A section.
Back of OmniView
™
MATRIX
F1D208-OSD_EU_man.qxd 4/20/00 4:37 PM Page 6