5
When ready to use your equipment
again, repeat Steps 1–5.
NOte:
A green LED on the wireless
remote switch will illuminate when
the switch is pressed. This indicates
that the signal was sent and that the
battery is OK. If you do not see the
light, it is time to replace the battery.
To replace the battery, see the
Troubleshooting section.
2
Turn on and use your devices
as usual.
3
When you are finished using your
devices, turn off each device as you
normally would.
4
When your devices are turned off,
firmly press and release the “O”
button to turn OFF the Remote-
Switched Outlets. As you press the
button, a green light flashes on the
remote switch to indicate that you
have eliminated power to Conserve
Switch’s Remote-Switched Outlets.
Devices plugged into the Always-
On Outlets will remain powered.
