4
Remove the clear battery tab
from the back of the remote switch.
The remote is now ready to use.
NOte:
Mounting screws are not
included; see the “Wireless Remote
Switch with Wall-Mount” section
later in this user guide.
iNdiCatOR liGhtS
.
The “Always-On Outlets” light should
be on if power is present. If this light
goes out at any time, it means the circuit
breaker has tripped and should be reset.
.
The “Not Grounded” light should not be
on. If this light turns on, you may have
a ground-wiring problem in your home
and you should contact an electrician to
properly ground the outlet. Connecting a
Belkin Surge Protector to an improperly
grounded outlet will void all Belkin
warranties. If your home is properly
grounded and the “Not Grounded” light
is on, please contact Belkin for your free
replacement.
.
The “Remote-Switched Outlets” light
shows the state of the Remote-Switched
Outlets. When the light is on, the
Remote-Switched Outlets are powered;
if the light is off, the Remote-Switched
Outlets are not powered.
hOw tO USe YOUR CONSeRve
RemOte SwitCh
1
Firmly press and release the “I”
button to turn ON the Remote-
Switched Outlets. As you press the
button, a green light flashes on the
remote switch to indicate that the
remote is working. Your devices are
now powered and ready for use.
