Belimo LM24A-MOD, Technical Data Sheet

Page: 1 / 7

Technical data sheet LM24A-MOD
www.belimo.com LM24A-MOD • en-gb • 2022-07-15 • Subject to change 1 / 7
Communicative damper actuator for
adjusting dampers in technical building
installations
• Air damper size up to approx. 1 m²
• Torque motor 5 Nm
• Nominal voltage AC/DC 24 V
• Control modulating, communicative, hybrid
• Conversion of sensor signals
• Communication via BACnet MS/TP, Modbus
RTU, Belimo-MP-Bus or conventional control
Technical data
Electrical data Nominal voltage AC/DC 24 V
Nominal voltage frequency 50/60 Hz
Nominal voltage range AC 19.2...28.8 V / DC 21.6...28.8 V
Power consumption in operation 2.5 W
Power consumption in rest position 1.3 W
Power consumption for wire sizing 5 VA
Connection supply / control Cable 1 m, 6 x 0.75 mm²
Data bus communication Communicative control BACnet MS/TP
Modbus RTU (default setting)
MP-Bus
Number of nodes BACnet / Modbus see interface description
MP-Bus max. 8
Functional data Torque motor
5 Nm
Torque variable 25%, 50%, 75% reduced
Operating range Y 2...10 V
Operating range Y variable 0.5...10 V
Position feedback U 2...10 V
Position feedback U note Max. 1 mA
Position feedback U variable Start point 0.5...8 V
End point 2...10 V
Position accuracy ±5%
Direction of motion motor selectable with switch 0/1
Direction of motion note Y = 0%: At switch position 0 (ccw rotation) / 1
(cw rotation)
Direction of motion variable electronically reversible
Manual override with push-button, can be locked
Angle of rotation Max. 95°
Angle of rotation note can be limited on both sides with adjustable
mechanical end stops
Running time motor 150 s / 90°
Running time motor variable 35...150 s
Adaptation setting range manual
Adaptation setting range variable No action
Adaptation when switched on
Adaptation after pushing the manual override
button
Override control, controllable via bus
communication MAX (maximum position) = 100%
MIN (minimum position) = 0%
ZS (intermediate position) = 50%