40
Advanced settings
7.5
Change PIN
The PIN is used for setting call barring
numbers and registration/unregistration
of handsets. The default PIN number is
0000. This PIN is also used to protect
the settings of your handset. Your
handset will prompt you whenever the
PIN is required.
The default PIN code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have
easy access to them. Do not lose the PIN
code.
1
Press
m
in idle mode, scroll
n
to
Advanced Set
and press
o
Select
.
2
Scroll
n
to
Change PIN
and
press
o
Select
.
3
Old PIN:
will be displayed. Enter
the current PIN and press
o
OK
.
• The PIN entered will be shown
as asterisks (*) on the screen.
• If you enter an incorrect PIN
number, an error tone will sound
and “Wrong PIN!” will be
displayed. Then, you will be
prompted to enter the current
PIN again.
4
New PIN:
will be displayed. Enter
the new PIN and press
o
OK
.
5
Confirm PIN:
will be displayed.
Enter the new PIN again and press
o
OK
to confirm PIN change.
• A validation tone is emitted,
Saved!
is displayed and the
screen returns to the
Advanced
Set
menu.
If you forget your PIN, you will need to
reset your phone to its default settings.
For more details, see section 7.8 - “Reset
Unit.”
7.6
Registration
If you wish to register an additional
handset or if you have inadvertently
unregistered your phone’s handset and
want to re-register it, follow the
procedure described below. This is the
procedure for registering Twist619
handsets. Procedures may vary for other
types of handsets. In this case, please
refer to the manufacturer of the handset.
Additional handsets must be registered
to the base station before you can use
them. Up to 5 handsets can be registered
to one base station. The PIN is required
before you can register or unregister
handsets.
By default, the PIN is 0000.
1
On the base station, press and hold
a
for 3 seconds. A beep sounds to
indicate that the base is ready to
accept registration.
If no action is taken on the handset
within 90 seconds, the registration
procedure will be aborted. If this
happens, repeat from Step 1.
2
On the handset, press
m
, scroll
n
to
Advanced Set
and press
o
Select
.
3
Scroll
n
to
Register
and press
o
Select
.
Note
Tip
Note
Note
Summary of Contents for Twist 619
Page 1: ...3111 285 50201 Belgacom Twist 619 User manual...
Page 2: ......
