BELGACOM Forum 526 Mounting And Commissioning Manual Download Page 58

Page: 58 / 232

Configuration

7. Reconnect the Forum 525/526 to the power supply.

8. Configure the S

module in the

Configurator

of the

Forum 525/526 (refer to

Configuration

starting on page 61).

Check the level 1 status with reference to the LEDs on the
module. None of the LEDs are illuminated before the S

module has been configured.

9. Pull out the mains plug of the Forum 525/526 again and close

the housing.

10.Reconnect the Forum 525/526 to the power supply.

Configuration

The menu item

appears in the

Configurator

, menu

Teleph-

ony: Ports

after installation of the S

module. Configure the

port in the input mask of this menu item. Further information on
this can be found in the online help.

LED Display

LED

Meaning

1 (green)

Synchronous (= ok)

2 (green)

Blue alarm

3 (yellow)

Remote alarm or out of sync
(yellow alarm)

4 (red)

Loss of signal (red alarm)

Summary of Contents for Forum 526









































































































































































































































Search results

Summary of Contents for Forum 526

Reviews:

Related manuals for Forum 526

Brands by name

Popular brands

BELGACOM Forum 526, Mounting And Commissioning Manual

Search results

Summary of Contents for Forum 526

Reviews:

Related manuals for Forum 526

Brands by name

Popular brands