23
Densité 3+ FR1
User Manual
iControl - click the
Network
button and select the SNMP tab.
Click the
Activate SNMP Agent
box to
activate this feature
Enter the IP addresses of up to three
SNMP trap targets in the boxes provided.
Using the Menu:
SNMP activation and up to three target IP addresses can be entered in the menu via the
SNMP OPTIONS item.
Data Restoration
Many of the Densité-series cards that can be installed in the Densité 3+ FR1 frame are
complex and have a lot of data stored on-board related to their configuration and
parameter values. The CPU-ETH2 controller provides a backup of this data, which can be
restored to the card when needed. This is valuable if the card is inadvertently reconfigured,
or is replaced after failure with a new card of the same type. The saving of the current data
into the controller’s memory, and restoring the data onto the Densité-series card, can be
done manually or automatically.
For manual operation:
