22
CPU-ETH2 Controller Card
SNMP functionality
Status - Cards
Select the
Cards
tab to see a chart of the current send
(Tx) and receive (Rx) data rates, and speed, for all cards
installed in the Densité frame.
Note that in the Densité 3+ FR1 frame, only slots 1 to 4
are available.
• A GPI-1501 or a REF-1801-FR1 card installed in the
dedicated system card slot will appear in slot 5.
For a more detailed report on the status of a specific
card, open that card’s control panel in iControl.
Status - CPU-ETH2 Resource Usage
Select the
Advanced
tab to view a report on the usage
of the card’s resources:
Using the Menu
Select STATUS and then [SEL] to cycle through the list of current faults. The information
shown on the
Network
,
Cards
and
Advanced
tabs is not available through the menu.
SNMP functionality
The CPU-ETH2 card can function as an SNMP agent, sending SNMP traps to designated
targets.