15
Densité 3+ FR1
User Manual
• CPU-ETH2 controllers are identified as Controller2 in the Type column of the iControl
Navigator window.
• For convenience, enter a descriptive Label in the Info panel of the card, to make it easy
to locate this specific frame controller amongst those in the list. See
page 19 for instructions.
The iControl panel for the CPU-ETH2 controller displays a series of buttons down the left-
hand side. Clicking a button changes the contents of the main window to display status
reports and controls related to the topic named on the button.
A full description of the use of the iControl interface to configure the CPU-ETH2 card is
given below, beginning on
.
Using the local control panel
The local control panel is fastened to the front of the CPU-ETH2 controller card, and when
installed is located in the top left of the frame, above the left-hand power supply.
The panel consists of a display unit capable of displaying two lines of text, each 16
characters in length, and five pushbuttons.
