Belden Hirschmann SPIDER SL Series, User Manual

Page: 16 / 40

16
Installation SPIDER-SL
Release 06 01/2020
1.4 Power supply
1.4.1 Supply voltage with the characteristic value HH
The following options for power supply are available:
 3-pin terminal block
You will find information on connecting the supply voltage here:
See “Connecting the 3-pin terminal block (device variants with
characteristic value HH)” on page 25.
1.4.2 Supply voltage with characteristic value HK
The following options for power supply are available:

3-pin terminal block
You will find information on connecting the supply voltage here:
See “Connecting the 3-pin voltage terminal with spring (device variants
with the characteristic value HK)” on page 26.
1.5 Ethernet ports
You can connect end devices and other segments to the device ports using
twisted pair cables or optical fibers (F/O).
You find information on pin assignments for making patch cables here:
“Pin assignments” on page 18
1.5.1 10/100/1000 Mbit/s twisted pair port
This port is an RJ45 socket.
The 10/100/1000 Mbit/s twisted pair port allows you to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX/
1000BASE-T standard.
This port supports:

Autonegotiation

Autopolarity
 Autocrossing
 1000 Mbit/s full duplex
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode

10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode