Belden HIRSCHMANN SPIDER II, User Manual

Page: 17 / 36

Installation SPIDER II
Release 07 10/2013
17
1.3.3 10/100/1000 Mbit/s twisted pair port
This port is an RJ45 socket.
The 10/100/1000 Mbit/s twisted pair port offers you the ability to connect
network components according to the IEEE 802.3 10BASE-T/100BASE-
TX/1000BASE-T standard.
This port supports:

Autonegotiation

Autopolarity
 Autocrossing
 1000 Mbit/s full duplex
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode

10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
1.3.4 100 Mbit/s F/O port
For the device variants 8TX/1FX EEC, 8TX/1FX-SM EEC, 8TX/2FX EEC and
8TX/2FX-SM EEC, these ports are DSC connectors.
For the device variants 8TX/1FX-ST EEC and 8TX/2FX-ST EEC, these ports
are ST connectors.
The 100 Mbit/s F/O port offers you the ability to connect network components
according to the IEEE 802.3 100BASE-FX standard.
This port supports:
 Full duplex mode
Pin Function PoE voltage
1 RD+ Receive path Minus terminal
2 RD − Receive path Minus terminal
3 TD+ Transmission path Plus terminal
6 TD − Transmission path Plus terminal
4,5,7,8 —
Table 7: Pin assignment of the 10/100 Mbit/s PoE port, RJ45 socket, MDI-X mode,
phantom voltage
Pin Function
1 BI_DB+
2 BI_DB −
3 BI_DA+
4 BI_DD+
5 BI_DD −
6 BI_DA −
7 BI_DC+
8 BI_DC −
Table 8: Pin assignment of the 10/100/1000 Mbit/s twisted pair port, RJ45 socket,
MDI-X mode
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8