32
Installation RSR20/RSR30
Release 06 07/2021
The 1000 Mbit/s F/O port offers you the ability to connect network
components according to the IEEE 802.3 100BASE-SX/1000BASE-LX
standard.
This port supports:
Autonegotiation
Full duplex mode
Delivery state: Autonegotiation activated
Verify that you connect LH ports only with LH ports, SX ports only with SX
ports, and LX ports only with LX ports.
1.4.5
100 Mbit/s F/O port
This port is an MTRJ, DST, or DSC socket.
The 100 Mbit/s F/O port allows you to connect network components
according to the IEEE 802.3 100BASE-FX standard.
This port supports:
Full or half duplex mode
Default setting: Full duplex
Note:
Verify that the LH ports are connected only with LH ports, SM ports
only with SM ports, and MM ports only with MM ports.
When connecting the data cables, note the sending and receiving directions.
1.4.6
Gigabit combo port
You have the option of alternatively connecting a twisted pair cable via a
RJ45 socket or an optical fiber via a SFP transceiver to a combo port.
You obtain appropriate SFP transceivers as an accessory.
By inserting a SFP transceiver, you deactivate automatically the
corresponding twisted pair interface.
Example:
Sending direction
Receiving direction
Table 15: Sending and receiving directions
Summary of Contents for HIRSCHMANN RSR20 Series
Page 66: ......
