Configuration
4.3 Mobile WAN Configuration
Figure 20: Example of Check Connection Configuration
4.3.5 Data Limit Configuration
Item
Description
Data Limit
Specifies the maximum expected amount of data transmitted (sent
and received) over GPRS in one billing period (one month). Max-
imum value is 2 TB (2097152 MB).
Warning Threshold
Specifies a percentage of the "Data Limit" in the range of 50 % to
99 %. If the given percentage data limit is exceeded, the router will
send an SMS in the following form;
Router has exceeded (value
of Warning Threshold) of data limit.
Accounting Start
Specifies the day of the month in which the billing cycle starts for
a given SIM card. When the service provider that issued the SIM
card specifies the start of the billing period, the router will begin to
count the amount of data transferred starting on this day.
Table 21: Data Limit Configuration
If the parameter
Data Limit State
(see below) is set to
not applicable
or
Send SMS when data
limit is exceeded
in
SMS Configuration
is not selected, the
Data Limit
set here will be ignored.
4.3.6 Switch between SIM Cards Configuration
In the lower part of the configuration form you can specify the rules for toggling between the
two SIM cards.
The router will automatically toggle between the SIM cards and their individual setups depend-
ing on the configuration settings specified here (manual permission, roaming, data limit, binary
input state). Note that the SIM card selected for connection establishment is the result of the
logical product (AND) of the configuration here (table below).
Item
Description
SIM Card
Enable or disable the use of a SIM card. If you set all the SIM
cards to
disabled
, this means that the entire cellular module is
disabled.
•
enabled
– It is possible to use the SIM card.
•
disabled
– Never use the SIM card, the usage of this SIM
is forbidden.
Continued on next page
48
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
Summary of Contents for Hirschmann OWL LTE M12
Page 153: ......
