Typical Situations
7.4 Serial Gateway
Figure 94: Serial Gateway – konfigurace
Expansion Port 1
To communicate with the serial device (PLC), connect from the PC (Labeled as SCADA in
Fig.
) as a TCP client to the IP address 10.0.6.238, port 2345 (the public IP address of the
SIM card used in the router, corresponding to the usb0 network interface). The devices can
now communicate. To check the connection, go to
System Log
(
Status
section) and look for the
TCP connection established
message.
142
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
Summary of Contents for Hirschmann OWL LTE M12
Page 153: ......
