Administration
6.5 Set SMS Service Center Address
6.5 Set SMS Service Center Address
The function requires you to enter the phone number of the SMS service center to send SMS
messages. To specify the SMS service center phone number use the
Set SMS Service Center
configuration form in the
Administration
section of the main menu. You can leave the field blank
if your SIM card contains the phone number of the SMS service center by default. This phone
number can have a value without an international prefix (xxx-xxx-xxx) or with an international
prefix (+420-xxx-xxx-xxx). If you are unable to send or receive SMS messages, contact your
carrier to find out if this parameter is required.
Figure 76: Set SMS Service Center Address
6.6 Unlock SIM Card
It is possible to use the SIM card protected by PIN number in the router – just fill in the PIN
on the
Mobile WAN Configuration
page. Here you can remove the PIN protection (4–8 digit
Personal Identification Number) from the SIM card, if your SIM card is protected by one. Open
the
Unlock SIM Card
form in the
Administration
section of the main menu and enter the PIN
number in the
SIM PIN
field, then click the
Apply
button. It is applied on the currently enabled
SIM card, or on the first SIM card if there is no SIM card enabled at the moment.
The SIM card is blocked after three failed attempts to enter the PIN code. Unblocking of
SIM card by PUK number is described in next chapter.
Figure 77: Unlock SIM Card
128
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
Summary of Contents for Hirschmann OWL LTE M12
Page 153: ......
