Configuration
4.15 Expansion Port (RS232)
Figure 60: Expansion Port Configuration
If you mark the
Reject new connections
check box, then the router rejects any other connec-
tion attempt. This means that the router no longer supports multiple connections.
If you mark the
Check TCP connection
check box, the router verifies the TCP connection.
Item
Description
Keepalive Time
Time after which the router verifies the connection.
Keepalive Interval
Length of time that the router waits on an answer.
Keepalive Probes
Number of tests that the router performs.
Table 60: Serial Interface – Check Connection Configuration
When you mark the
Use CD as indicator of the TCP connection
check box, the router uses
the carrier detection (CD) signal to verify the status of the TCP connection. The CD signal
verifies that another device is connected to the other side of the cable.
CD
Description
Active
TCP connection is enabled
Nonactive
TCP connection is disabled
Table 61: CD Signal Description
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
111
Summary of Contents for Hirschmann OWL LTE M12
Page 153: ......
