6.6.5 Reset Button
The
RST
button on the front panel has three functions on OWL 4G routers:
•
Reboot the router:
Hold the
RST
button for less than 4 seconds, the router will be restarted.
•
Factory reset – restore the default configuration:
Hold the
RST
button for more than 4 seconds. The
PWR
LED turns off and on again.
We recommend holding down the
RST
button for 1 second after turning on the PWR LED
on the front panel.
•
Factory reset – restore the default configuration when unable to boot:
If the router is unable to boot due to a bad configuration, turn off the router (power
supply). Push and hold the
RST
button, turn on the router and hold the
RST
button for at
least 10 seconds. This will return the router to default configuration.
Before performing the factory reset of the router, it is recommended to back up the router
configuration settings (see "Configuration OWL 4G Family" user manual) because reset
of the router will return all configuration settings to their default states.
You can download the "Configuration OWL 4G Family" user manual on the Internet
at:
https://www.doc.hirschmann.com/
In order to press the
RST
button it is necessary to use a narrow screwdriver or any other small
tool.
Figure 16: Router reset
28
UM Installation OWL LPWAN
Release 02 - 02/2020
