Page
53
of
100
OpEdge
Industrial Edge Gateway – Release 01.0.00 – 10/2022
5.4.2 File Transfer to Belden Horizon
Users can transfer files from OpEdge to Belden Horizon. Below is the example for Belden Horizon
file transfer.
1
Generate the Activation key from the overview page and add gateway on Belden Horizon.
Detailed steps are given in section 3.1 for activating gateway on Belden Horizon.
2
From the WinSCP Client, open a SFTP/FTP session to OpEdge and transfer few files to
the Upload folder on OpEdge Internal Storage. Select
Belden Horizon
for
Outgoing
and
also set a time for the file transfer.
Use the same username and password for the SFTP/FTP session as given on the
OpEdge Incoming file relay section.