MIPP
Release 01 01/12
9
1.2
Description of the modules
The modules form the interface between the laid cable and patch cable.
Optical fiber cables are connected via adapters, Ethernet cables via
RJ45 Keystone jacks.
The following modules are available:
LC for connecting LC patch cables
SC for connecting SC patch cables
CU for connecting Ethernet patch cables
The modules can be:
combined with each other in any way
with the cable gland mountable on the bottom or in the top of the housing
equipped with adapters or keystone jacks according to your order
requirements
1.2.1
LC module
The following module designs are available:
Single module (30 mm width) with LC Duplex adapters for a maximum of
12 fibers
Double module (60 mm width) with LC Duplex adapters for a maximum of
24 fibers
The LC module consists of the following components:
Fiber bracket
LC Duplex adapters with mirror-image construction
2 permanent installed screws for assembly on the housing
Brilliance connectors or optical fiber pigtails with LC connectors
(depending on order)
Optical fiber splice holder
Fixing for strain relief
Cable gland
M16 with single modules
M20 with double modules
Note:
The M16 cable gland of the single module is suitable for cable with
a maximum diameter of 10 mm.
The M20 cable gland of the double module is suitable for cable with a
maximum diameter of 13 mm.
Summary of Contents for Hirschmann MIPP
Page 26: ......
