Belden HIRSCHMANN MACH 1040 Series, User Manual

Page: 32 / 52

32
MACH 1040
Release 02 03/2013
Figure 13: Vertical mounting on the wall
2.1.5 Startup procedure
When you connect the supply voltage, you start up the device.
2.1.6 Connecting the data lines
You can connect terminal devices and other segments at the ports of the
device via twisted pair cables or F/O cables.

Install the data lines according to your requirements.

10/100/1000 Mbit/s twisted pair connection
These connections are RJ45 sockets.
10/100/1000 Mbit/s TP ports enable the connection of terminal devices or
independent network segments according to the IEEE 802.3 10BASE-T/
100BASE-TX/1000BASE-T standard.
The MAR1042 and MAR1142 devices also allow:
IEEE 802.3af (Power over Ethernet on data lines).
These ports support:
 Autonegotiation
 Autopolarity