28
MACH 1040
Release 02 03/2013
2.1.4
Installing the device
Note:
The shielding ground of the connectable industrial twisted pair lines is
connected to the front panel as a conductor.
Mounting in a switch cabinet
Note:
Install the device in the 19" switch cabinet using sliding or mounting
rails.
This provides a more stable position of your device in environments
subject to vibration.
For more information on sliding/mounting rails and how to install them,
please contact your switch cabinet manufacturer.
WARNING
ELECTRIC SHOCK
Only install this device in a switch cabinet or in an operating site with limited
access, to which only maintenance staff have access.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
CAUTION
OVERHEATING OF THE DEVICE
When installing the device, ensure that the ventilation slots are not covered.
Non-adherence to these instructions can lead to minor physical injury
or material damage.
Summary of Contents for HIRSCHMANN MACH 1040 Series
Page 51: ...MACH 1040 Release 02 03 2013 51...
Page 52: ......
