Belden Hirschmann BAT867-R, User Manual

Page: 44 / 58

44
Installation BAT867-R
Release 10 09/2021
10 Technical data
10.1 General technical data
Dimensions
W × H × D BAT867-R See “Dimension drawings” on page 45.
Weight 520 g (18.3 oz)
Supply voltage Rated voltage 24 V DC
Voltage range incl. maximum
tolerances 18 V DC ... 32 V DC
Connection type 2-pin terminal block
Power loss buffer 10 ms at 24 V DC
Overload current protection on
the device Non-replaceable fuse
Back-up fuse Nominal rating: 3.5 A
Characteristic:
slow blow
Peak inrush current (slow
voltage increase) 850 mA
Current integral I²t 0.373 A
2
s
Climatic
conditions during
operation Minimum clearance around the
device Top and bottom sides of device: 5 cm (2 in)
Left and right device side: 2 cm (0.79 in)
Ambient air temperature
a
a. Temperature of the ambient air at a distance of 5 cm (2 in) from the device
-10 °C ... +60 °C (+14 °F ... +140 °F)
Maximum inner temperature of
device (guideline) +90 °C (+194 °F)
Humidity 10 % ... 95 % (non-condensing)
Air pressure min. 700 hPa (+3000 m ASL; +9842 ft ASL)
max. 1060 hPa (-400 m ASL; -1312 ft ASL)
Climatic
conditions during
storage Ambient air temperature
a
-40 °C ... +70 °C (-40 °F ... +158 °F)
Humidity 10 % ... 95 % (non-condensing)
Air pressure min. 700 hPa (+3000 m ASL; +9842 ft ASL)
max. 1060 hPa (-400 m ASL; -1312 ft ASL)
Pollution degree 2
Protection classes Degree of protection IP40
b
b. for DIN rail mounting