Belden Hirschmann BAT867-R, User Manual

Page: 36 / 58

36
Installation BAT867-R
Release 10 09/2021
5 Obtaining compliance for operation in
the European Union and in the United
Kingdom (UK)
For operation in the European Union, the device must comply with the Radio
Equipment Directive (RED) 2014/53/EU. For operation in the United
Kingdom (UK), the device must comply with the Radio Equipment
Regulations. The RED compliance and the Radio Equipment Regulations
compliance require compliant operation of the device in the 5 GHz band
channels. Compliant operation of the device is achieved by an unchangeable
determination of the country setting.
Make the country setting unchangeable using the Command Line Interface
(CLI), the graphical user interface WEBconfig or the LANconfig software.
You can download the LANconfig software from the Hirschmann product
pages (
www.hirschmann.com ).
Perform the following work steps:

Command Line Interface (CLI)

To access the possible country settings, execute the following
command:
set Setup/WLAN/Country ?
Note: The country setting “Europe” is valid for all European countries
and the United Kingdom (UK). Specific country settings such as
“France” or “Germany” include additional country specific channels in
comparison to the “Europe” country setting.
The device ignores specific country settings and uses the country
setting “Europe” until the RED compliance or the Radio Equipment
Regulations compliance has been obtained.

Select the desired country setting with the following command:
set Setup/WLAN/Country [Country]
Example:
set Setup/WLAN/Country France

Execute the following command:
> REDcompliance