Installation BAT867-R
Release 10 09/2021
25
1.4
Power supply
Power supply via a 2-pin terminal block
A 2-pin terminal block is available to supply the device with power.
Further information:
See “Connecting the terminal blocks” on page 31.
1.5
10/100/1000 Mbit/s twisted pair port
This port is an RJ45 socket.
The 10/100/1000 Mbit/s twisted pair port allows you to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX/
1000BASE-T standard.
This port supports:
Autonegotiation
Autopolarity
Autocrossing (if autonegotiation is activated)
1000 Mbit/s full duplex
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
Delivery state: Autonegotiation activated
The port casing is electrically connected to the front panel.
The pin assignment corresponds to MDI-X.
Summary of Contents for Hirschmann BAT867-R
Page 57: ...Installation BAT867 R Release 10 09 2021 57...
Page 58: ......
