58
Installation BAT450-F
Release 12 07/2020
13 Technical data
13.1
General technical data
Dimensions
W × H × D
BAT450-F
See “Dimension drawings” on page 60.
Weight
≥
4.41 lb (2.0 kg)
(depending on the device variant)
Supply voltage
with the
characteristic
value W
Connection type
8-pin, “X”-coded M12 socket for PoE port or
a 5-pin, “A”-coded M12 plug
Tightening torque of
the locking screw
5.3 lb-in (0.6 Nm)
Rated voltage DC:
24 V DC
Voltage range DC incl.
maximum tolerances:
16.8 V DC ... 32 V DC
Power loss buffer
10 ms at 19.2 V DC
Overload current protection on
the device
Non-replaceable fuse
Back-up fuse
Nominal rating:
3.5 A
Characteristic:
slow blow
Peak inrush current
14 A
Supply voltage
with characteristic
value N
Connection type
4-pin, “A”-coded M12 plug
Tightening torque of
the locking screw
5.3 lb-in (0.6 Nm)
Rated voltage DC:
110 V DC
Voltage range DC incl.
maximum tolerances:
77 V DC ... 138 V DC
Power loss buffer
10 ms at 77 V DC
Overload current protection on
the device
Non-replaceable fuse
Back-up fuse
Nominal rating:
3.5 A
Characteristic:
slow blow
Peak inrush current
4 A
Climatic
conditions during
operation
Minimum clearance around the
device
Top and bottom device side: 3.94 in (10 cm)
Left and right device side: 0.79 in (2 cm)
Ambient air temperature
a
11n device variants (non-LTE)
-40 °F ... +158 °F (-40 °C ... +70 °C)
11ac device variants (non-LTE)
-13 °F ... +158 °F (-25 °C ... +70 °C)
LTE device variants
-22 °F ... +158 °F (-30 °C ... +70 °C)
Humidity
10 % ... 95 % (non-condensing)
Air pressure
min. 700 hPa (+9842 ft; +3000 m)
max. 1060 hPa (-1312 ft; -400 m)
