Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN, User Manual

Page: 58 / 84

58 Installation MTS8003/8006/8010
Release 01 12/2021
2.5 Operating the device
Perform the following work steps:

Connect the power supply cable.

Enable the power supply.
2.6 Connecting the data cables
Note the following general recommendations for data cable connections in
an environments with high electrical interference levels:

Keep the length of the data cables as short as possible.

Use optical fiber data cable for data transmission between the buildings.

When using copper cables, provide a sufficient separation between the
power supply cables and the data cables. Ideally, install the cables in
separate cable channels.

Verify that power supply cables and data cables do not run parallel over
longer distances. To reduce inductive coupling, verify that the power
supply cables and data cables cross at a 90° angle. Use SF/UTP cables
according to ISO/IEC 11801:2002.

Connect the data cable according to your need.

Connect the data cable according to your requirements.
See “Device name and product code” on the page 26.
2.7 Filling out the inscription label
The information field for the MAC address helps you identify your device.