INSTALLATION AND OPERATION GUIDE
Configuring the XIP-3901-UDC-IP Application
110 | XIP-3901
Metadata Panel
The Metadata panel has two tabs (
UDC1
and
UDC2
); one for each of XIP-3901-UDC-
IP’s independent
processing channels. The configuration of the
UDC2
tab is the same as the
UDC1
tab. Only the configuration of
the
UDC1
tab is shown below.
The XIP-3901-UDC-IP manages the transfer of metadata between its input and output, but does not process the
metadata information regarding the video conversion. In the Metadata Panel, you can selectively pass or block
any one of eight specific ANC data types by specifying the DIDs and SDIDs to be passed from input to output and
those that are to be blocked.
In the case of
Time Code
option, when set to the
Process
mode, this activates the controls under the
Timecode
tab.
Figure 71
Metadata panel
