49
Restoring to the factory default condition
Restoring to the factory default condition
Use this procedure to restore the T2 from built-in USB image stick.
CAUTION: Do not connect any external storage device via USB port, or the media
card reader when restoring to the factory default condition.
CAUTION: A recovery will initialize all of the data below. You should back up your
data to an external storage.
- Database
- T2 configuration
- Logs (the operation log, Windows OS internal event log, database log, and
crash dumps)
1. Turn on the T2.
2. When the POST screen appears, keep pressing the [F7] key on the keyboard.
• Boot Menu (Please select boot device:) appears.
3. Select GH PicoDriveL3 PMAP using the [
] or [
] key, and then press the [Enter]
key.
!
!
