12
Rattler 4 Operation
Rattler 4 Dual Unit Operation
Rattler 4 Dual Unit Operation
Rattler 4 Dual Unit operation is nearly identical to that of the single units. The dual units
have two independent LED displays, one on each side of the unit. Only one power supply is
required.
Fig. 2-7: Rattler 4 Dual Unit
1
Two BNC connectors
• The Dual TX unit has two BNC Inputs
• The Dual RX unit has two BNC Outputs
• The TR transceiver unit has one BNC Input and one BNC Output.
2
Two ST connectors
• The Dual TX unit has two ST Outputs
• The Dual RX unit has two ST Inputs
• The TR transceiver unit has one ST Input and one BNC Output
3
LED Display
• Two LEDs for TX Units
• Five LEDs for RX Units
• One of each type for Transceiver Units
4
Power Connection:
the Pico-PA adapter allows the Rattler 4 to be used with standard
12V XLR power sources such as battery belt packs and power supplies (Mini-XLR Power
connector and cable not shown for clarity).
•
LED Display:
second LED display on side opposite from first LED diplay (five or two
LEDs depending on Rattler 4 model).
