10
Rattler 4 Operation
Rattler 4 Single Unit Components
Rattler 4 Single Unit Components
The Rattler 4 has no user adjustable components. The LED area provides monitoring once
the connections are made and the unit is connected to power.
Fig. 2-1: Rattler 4 Single Unit
The Rattler 4 Single Unit features the following:
1
BNC Connector
: HD/SDI Input for the Tx Unit and Output for the Rx Unit. Please see
on page 7 for a list of supported signals.
2
ST Fiber Connector
3 LED Display Area
• The Tx unit has a two LED Display
• The Rx unit has a five LED Display
Please see below for detailed information on the LED display area.
4
Mini-XLR Power Connector
: the connector is attached permanently to the Rattler 4
Unit and can be powered by the Grass Valley LKS-WSU Universal Power Supply or by
any power supply with a Mini-XLR3F power connector. The Rattler 4 operates on 5-16
VDC.
Fig. 2-2: Power Supply and Connector
Note:
The Mini-XLR power connector is not compatible with previous
4-pin XLR power supplies without using a connector adaptor.
LKS-WSU Power Supply
Pin 1: Shield
Pin 2: Ground
Pin 3: +5 VDC
