Belden grass valley MV-840 Series User Manual Download Page 38

Page: 38 / 77

MV-841/851 User Manual

MV-841/851 Multiviewer Rear Panel (MV-840-RP/MV-850-RP)

Hardware Modules

Issue 1 Revision 1

Page 20

MV-841/851 Multiviewer Rear Panel (MV-840-RP/MV-850-RP)

Note:

These rear panels are also used on the MV-840 and MV-850.

The MV-851 (or MV-841) multiviewer, when fitted into a Sirius 850 router frame, can receive
video expansion signals from a second, linked, Sirius 850 frame. (See Sirius User Manual,
Section 12 for details about S850 router expansion.)

The module can provide up to 12 multiviewer video display outputs, providing multiviewer
video wall outputs.

CAUTION

Electrostatic Damage

Static precautions must be observed when handling, inserting or
removing modules.

Figure 10

MV-841/851 Multiviewer Rear Panel (Also used on MV-840 and MV-850)

Rear Panel

Insertion/Removal

knurled Handles

Summary of Contents for grass valley MV-840 Series














































































Search results

Summary of Contents for grass valley MV-840 Series

Reviews:

Related manuals for grass valley MV-840 Series

Brands by name

Popular brands

Belden grass valley MV-840 Series, User Manual

Search results

Summary of Contents for grass valley MV-840 Series

Reviews:

Related manuals for grass valley MV-840 Series

Brands by name

Popular brands