MV-841/851 User Manual
Introduction
Hardware Installation
Issue 1 Revision 1
Page 30
© 2020 Grass Valley, a Belden Brand
Introduction
Installation of the MV-841/851 Multiviewer hardware can be carried out while the Sirius 800
router is operating, without impacting the main routing function.
Installation instructions are identical for MV-841 and MV-851 integrated multiviewer modules.
If the MV-841/851 is being fitted to an existing, installed router, then the router frame’s module
slots for the MV-841/851 hardware must be identified. Slot identification is part of the
MV-841/851 hardware installation instructions contained in this section.
More than one MV-841/851 unit may be fitted to a Sirius 840/850 router and these instructions
cover the fitting of one or more units.
The router may already have some options installed in the module slots required for the
MV-841/851 option. These installation instructions do not assume the presence or absence of
any particular option modules already in the router.
Unpacking
A MV-841/851 Multiviewer module is supplied in dedicated packaging provided by the
manufacturer and should not be accepted if delivered in inferior or unauthorized materials.
1 Carefully unpack the system components and check them against the listed items here:
• MV-841/851 Multiviewer main module.
• MV-841/851 Multiviewer rear module.
2 Check that the equipment has not been damaged in transit. If there is anything incorrect,
then notify your Grass Valley Partner, or Grass Valley, at once.
3 Always retain the original packing materials if possible, they could prove useful should it
ever be necessary to transport or ship the equipment.
Always read the installation guide and the user instructions carefully, it will provide you with
helpful hints and tips about care and maintenance and help you get the most out of your
MV-841/851 Multiviewer.
(Grass Valley manuals may be downloaded from
http://www.grassvalley.com/products/
)
Note:
If your Sirius 800 router has been purchased from Grass Valley with
MV-841/851(s) already fitted,
then the MV-841/851 hardware installation task just comprises
making connections to the MV-841/851 Rear Panel at the rear of the
router (see
CAUTION
Electrostatic Damage
Static precautions must be observed when handling,
inserting or removing modules.
CAUTION
Electrostatic Damage:
Static precautions must be observed when handling,
inserting or removing modules.
