MV-841/851 User Manual
MV-841/851 Set up
Product Overview
Issue 1 Revision 1
Page 12
© 2020 Grass Valley, a Belden Brand
MV-841/851 Set up
Hardware Installation
Hardware installation is described in Section
Router Power Supply Considerations
A router’s available power supply capacity depends on:
•
the complement of modules already fitted to the router;
•
the Power Supply Modules fitted to the router;
•
whether the MV-841/851 Integrated Multiviewer(s) replace(s) any currently-fitted
modules and their module type.
Initial MV-841/851 Configuration
Each MV-841/851 is configured separately.
Typically, a new MV-841/851 will be using a default IP address (10.54.31.221, 10.54.31.226 or
10.54.31.231) on Ethernet port 1 (“1G1”). See
, on page 53, Table 13 on page 57,
for default IP addresses on all network ports.
Initial configuration and set up of the MV-841/851 multiviewer is done via Grass Valley’s
RollCall Control Panel application. See the ‘
MV-8 Series Multiviewer
’ user manual, in the section
about RollCall templates and “Getting Started”.
Configuration Screens (RollCall Templates)
Following the initial configuration of the MV-841/851 Multiviewer, the RollCall Control Panel
tool may then be used to access RollCall templates and control various MV-841/851 items,
including the selection of video wall layouts, monitoring alarm status, acknowledging alarms
and control of timer widgets on the video wall.
Refer to the ‘
MV-8 Series Multiviewer
’ user manual for full details of the MV-841/851 module’s
RollCall templates and configuration information.
Note:
Upgrading of the Sirius 800 router controller software is described
the ‘Sirius Maintenance and Upgrade Manual’, Section 9, “Nucleus
Upgrade and Maintenance”.
CAUTION
Power supply considerations:
The Sirius router must have enough power supply capacity to power any
MV-841/851 modules being fitted.
There are many different Sirius 800 system module and power supply
combinations. Therefore, before adding an MV-841/851 to a Sirius 840/850
router, check that the configuration of power supplies fitted to your router
can supply sufficient power to the MV-841/851 Multiviewer:
•
See the Sirius 800 User Manual for router power requirements.
•
, on page 53 for MV-841/851 power
requirements.
•
Contact Grass Valley support for advice.
