Belden Grass Valley MCP 450, User Manual

Page: 25 / 44

MCP 450 Master Control PC User’s Guide (v1.1) 25
Chapter 3 - Operation
3.2.5 Operating combined functions
The matrix function setup in the multiple camera mode makes it possible to combine a
function and operate it for multiple cameras simultaneously.
Click on a function at the top of the matrix. If you have selected more than one camera the row
of values underneath the function is selected:
Click on one of the values in the row: this value will become the master value, the values of all
other cameras will follow its settings:
Analog functions can be changed using the Rotary Controls at the bottom. Select or toggle
functions will be set to the same value for all cameras.
3.2.6 Monitoring cameras
At the left side the cameras are listed with their number, diagnostic and On Air status. Click or
tap the Diagnostics button at the right side of the screen to see detailed information.
Camera
number
Diagnostics status:
a white cross in a red
circle indicates an alert
On Air / ISO status:

Yellow = ISO

Red = On Air

Grey = none