Belden Grass Valley LUMO, User Manual

Page: 18 / 71

4
LUMO Housing Frame
Overview
Features
• 1 RU with 19” rack mount
• Up to 9 cards (72 Watts)
• Ease of serviceability
• Hot-swappable PSU with optional 2
nd
redundant PSU
• Hot-swappable cards, SFPs, controller and fan
• Status and alarm over IP with optional LUMO Ethernet Controller
• Cards can operate without controller
• Small granularity
• Fiber on the front, coax on the rear
• Multiple video and audio formats can be fitted in a single chassis
Physical Layout
Front Panel Appearance
Each card (numbered 1 to 9 from left to right as seen from the front of the unit) has its own face
plate which allows the status LEDs on the installed cards to be seen and also allows the card to
be secured in the chassis by a screw. The opening near the center of the panel is for the status or
controller card status LED.
The frame is provided with a fiber support that extends beyond the front of the frame to physi-
cally support the fiber cables and protect the fiber connectors from stress-related damage. Two
versions are available:
• Standard version, for single-fiber cables.
• MPO version, for multi-fiber cables connected with MPO connectors.
Rear Panel Appearance
The rear panel incorporates the electrical signal connectors, and so has a different appearance
for the LUMO-BNC and the LUMO-DIN. The central portion of the panel is the same for both
models.