54
Frame Operation and IP Network Setup
Navigating the Local Control Panel Menu
CPU-ETH3 local control panel - Top Menu
Once a card has been selected, four virtual navigation buttons (SEL, ESC,
[+], and [-]
) allow
you to navigate through menus to view and configure the card’s parameters.
CPU-ETH3 local control panel
The panel is assigned to operate any card in the frame by pressing the icon representing
the appropriate card on the Densité 3+ FR4 frame’s local control panel touch display.
Alternatively, pressing the status button on the front edge of a card will also bring up the
menu. The Status LED on the selected card becomes flashing orange.
Touch the CTRL button on the control panel to select the Densité 3+ FR4 frame’s controller
card itself.
Navigating the Local Control Panel Menu
The KMX-3921 has operating parameters which may be adjusted locally at the controller
card interface. Press the Select button on the front edge of a KMX-3921 card to assign the
local control panel to operate the card.
The local control panel displays a menu that can be navigated using the four buttons
located next to the display. The functionality of the buttons is as follows:
If no controls are operated for 30 seconds, the controller reverts to its normal standby
status, and the selected card’s Status LED reverts to its normal operating mode. If a
ETH2 LINK DOWN
CPU ETH3
PS1
PS2
FANs CTRL
REF
12
KMX
3921
24
KMX
OUT
11
KMX
3921
23
10
KMX
3921
22
9
KMX
3921
21
8
20
7
19
6
18
5
17
KMX
OUT
4
KMX
3921
16
XVP
3901
3
KMX
3921
15
2
KMX
3921
14
1
KMX
3921
13
- KMX-3921-A SLO
- 10.00 build 6439
KMX-3921
PS1
PS2
FANs CTRL
REF
SLOT 1
HOME
SEL
ESC
+
-
[+] and [-] Used for menu navigation and value modification.
SEL
Gives access to the next menu level. When a parameter value is shown, touching
this button once enables modification of the value using the [+] and [-] buttons;
pressing a second time confirms the new value.
ESC
Cancels the effect of parameter value changes that have not been confirmed;
touching ESC causes the parameter to revert to its former value.
Touching ESC moves the user back up to the previous menu level. At the main
menu, ESC does not exit the menu system. To exit, press the Select button on the
front edge of the card being controlled.
