Belden Grass Valley Kaleido-X, Installation & Service Manual

Page: 102 / 216

102
System Configuration
Installing XEdit from your Multiviewer’s Home Page
• The Router Control Software Single Bus and Matrix View applications (also part of the
iRouter Router Control Software packaged with iControl Application Servers) can be
used to control your multiviewer’s logical sources and monitor wall destinations, via
the
KX Router logical router, or to control other logical routers configured within your
multiviewer system. See Installing Router Control on page 107.
• Signal Path Viewer opens as a standalone panel, updated in real time, showing
assignment information between router sources and multiviewer inputs. Signal Path
Viewer is not used with Kaleido-IP. See
Installing Signal Path Viewer on page 110.
Installing XEdit from your Multiviewer’s Home Page
To install XEdit from your multiviewer’s home page
1 With your PC, open a Web browser window and type the multiviewer’s IP address in the
address bar.
The multiviewer’s home page appears.
2 Click the XEdit button.
The browser prompts you to save an executable file to your hard drive (
Kaleido-
windows32-online.exe
1
). This file is an online installer, which will download XEdit and
other companion elements from your multiviewer, and install them. Some browsers
may allow you to run the file directly. Depending on your browser’s security features,
warnings may appear, which you may safely dismiss.
3 Unless your browser let you run the file (and you chose to do so), navigate to the
location were you saved the installer file and open it.
More security warnings or prompts may appear, which you may safely dismiss or
accept.
A window appears, showing the download and installation progress.
1.Installers for Linux or Mac OS X are not yet available.