Belden GRASS VALLEY KALEIDO Series, Installation & Service Manual

Page: 55 / 128

55
Kaleido - IP X320/X120
Installation & Service Manual
Opening XAdmin
Connecting to a Multiviewer with a Different XEdit Version from your PC’s
Version
When connecting to a multiviewer with your PC and your PC already has XEdit installed, the
XEdit version installed on your PC and the Kaleido Software version on the multiviewer
must be same as explained below.
The composition of a Kaleido Software / XEdit version numbering is explained in the
following table.
When you connect to a multiviewer, the multiviewer’s Kaleido Software major and minor
version must match the XEdit major and minor version installed on your PC. When there is a
version number mismatch between the multiviewer’s Kaleido Software version and your
PC’s XEdit version, you will receive the following error when you try to connect to the
multiviewer with your PC.
Under this circumstance, proceed as follows.
• There is no compatibility problem if only the patch revision number is different
between the Kaleido Software version on the multiviewer and the XEdit version on
your PC. Click Yes to the Software Version Check screen.
• There is a compatibility problem if the major version, minor version, or both are
different between the Kaleido Software version on the multiviewer and the XEdit
version on your PC. The solution is to downgrade / upgrade the XEdit version used on
your PC to the Kaleido Software version used by the multiviewer. Proceed as follows:
• Click No to the Software Version Check screen.
• Unistall XEdit from your PC (see Uninstalling XEdit , on page 50).
• Install XEdit from the multiviewer (see Installing XEdit from your Multiviewer’s
Home Page , on page 46).
If you regularly connect to different multiviewer systems that use different Kaleido
Software versions, and as a result you receive the Software Version Check error message,
the best solution to avoid this is to upgrade all of your multiviewer systems to the same
Kaleido Software version.
Kaleido Software / XEdit Version Reference
Description
Version M.mp
M
is the major revision number
m is the minor revision number
p
is the patch revision number