Belden GRASS VALLEY KALEIDO Series Installation & Service Manual Download Page 47

Page: 47 / 128

Kaleido

IP X320/X120

Installation & Service Manual

3 Unless your browser let you run the file (and you chose to do so), navigate to the

location were you saved the installer file and open it.
More security warnings or prompts may appear, which you may safely dismiss or

accept.
A window appears, showing the download and installation progress.

At the end of the installation process:

• If you have Windows 7, or Windows 10, shortcuts (

) are added to your desktop

and to the Start menu (under

All Programs

• If you have Windows 8.1, or Windows 8, XEdit will appear on your desktop, in the

Apps view with all the other applications on your PC (Windows 8.1), or in your Start

screen (Windows 8).

Summary of Contents for GRASS VALLEY KALEIDO Series

































































































































Search results

Summary of Contents for GRASS VALLEY KALEIDO Series

Reviews:

Related manuals for GRASS VALLEY KALEIDO Series

Brands by name

Popular brands

Belden GRASS VALLEY KALEIDO Series, Installation & Service Manual

Search results

Summary of Contents for GRASS VALLEY KALEIDO Series

Reviews:

Related manuals for GRASS VALLEY KALEIDO Series

Brands by name

Popular brands