Belden grass valley Kaleido-IP X120, Installation & Service Manual

Page: 76 / 110

76
System Configuration
Configuring Head Streaming on a Kaleido-IP
Configuring Head Streaming on a Kaleido-IP
To configure head streaming
1 Obtain a license key from Grass Valley.
2 Open XAdmin. See Opening XAdmin , on page 49.
3 Click Head streaming , in the navigation area on the left side of the page.
The Head Streaming Configuration page appears.
Notes
• Kaleido-IP VM multiviewers output to a single, streaming head. In the case
of a Kaleido-IP VM, disregard references to a second head, in the procedure
below.
• Kaleido-IP multiviewers support head streaming, as an option. It is not
possible to enable or verify options in XAdmin’s Status and Options page,
for Kaleido-IP multiviewers. Contact Technical Support for activation and
configuration instructions (
Grass Valley Technical Support , on page 110).