28
Servicing the iTX Playout Appliance 2
Replacing the SDI Video I/O Card (Corvid LP)
9 Remove the network adapter card from the bracket by carefully pulling it away from
the middle of the bracket.
10 Replace the network graphics card by sliding the card into the bracket, ensuring that its
connector is aligned and securely interfacing with the bracket’s middle connector.
11 Fasten the screw that secures the network adapter card to the bracket.
12 Align the bracket with above its location within the chassis and ensure that cards’
connectors are align with the motherboard’s connectors. Press down on the bracket to
ensure proper connection.
13 Re-connect the graphics card’s cable to the
GPU PWR
connector on the chassis’
motherboard.
14 Lock the card bracket to the chassis by pressing down on the two small levers , or by
fastening the four screws.
15 Replace the cover of the chassis and reinstall the unit.
Replacing the SDI Video I/O Card (Corvid LP)
The following procedure applies only to iTX Playout Appliance 2 units that are equipped
with the AJA Corvid LP card(s) -- GVSP-3TB-WIN-2IO and GVSP-3TB-WIN-2+2IO.
