Belden Grass Valley IPVU, Installation Manual, Page: 51 / 98

51
IPVU Commissioning and Configuration
IPVU Commissioning and Configuration is done with RollCall software.
Factory Default IP Address and Network Port Usage
The factory default management IP address for the IPVU is 192.168.3.31 .
To set the IP configuration, see Ethernet Gb , on page 79.
Certain ports must be open on the management network. This information can be found
under
Port Usage in the RollCall V4 Suite & RollCall Lite Installation Guide . See Related
Documentation , on page 18.
Installing RollCall
To install RollCall, see the RollCall V4 Suite & RollCall Lite Installation Guide . See Related
Documentation , on page 18.
For help with general use of the RollCall application, open the user manual by clicking the
button on the main RollCall toolbar.
Firmware Upgrade
The firmware in the IPVU can be upgraded in the field. We strongly recommend to upgrade
the IPVU with the latest firmware for the latest feature and stability enhancements. See
Upgrading the IPVU’s Firmware , on page 84.
Terminology Used with RollCall
Term Description
Essence A general term used to describe an SDI component; Video, Audio
and Data are all essences.
Spigot Generic term for a Source or Destination.
Flow Sequence of RTP packets of a single essence.
Source Originator of one or more flows, i.e. a set of one or more sender
spigots.
Destination Receiver of one or more flows, i.e. a set of one or more receiver
spigots.